Tungsten Copper Classification

Tungsten Copper Classification

Tungsten copper alloy combines the properties of both metals, resulting in a material that is heat-resistant, ablation-resistant, highly thermally and electrically conductive, and easy to machine. Parts are made from the WCu alloy by pressing the tungsten particles into a desired shape, sintering the compacted part, then infiltrating with molten copper. Sheets, rods and bars of the alloy are available as well.

Tungsten Copper Alloy Resistance Welding Electrode
A combination of the advantages of tungsten and copper, high temperature resistance, electric arc ablation, high intensity, than the major, conductive, thermal conductivity, and ease of machining, and it has features such as cold sweating, as with tungsten high hardness, high melting point, anti-adhesion characteristics, often used to do a certain resistance to abrasion, resistant to high temperature welding, but welding electrode.

tungsten copper alloy electrode picture

Tungsten Copper Alloy Bar
By reason of tungsten copper alloy bar is provide with high electrical conductivity and low consumption, Tungsten Copper Bar are widely used to make Grid side rod, Lead, Support, Electrode for the Gas discharge lamp.

tunsgen copper alloy bar picture

Tungsten Copper Alloy Heat Sink
Tungsten copper is widely used as heat sinks concerning With radiator for car, refrigeration and air conditioning systems, because of its low thermal expansion, heat-resistant, ablate-resistant, excellent thermal and electrical conductivity. WCu heat sinks galvanic ally plated with Ni or NiAu or electroless Ni plated Semi-finished products: up to 100x100mm with a thickness of 0.5 to 50mm.

tunsgen copper alloy bar picture

Tungsten Copper Alloy Tube
Tungsten Copper alloy tubehas the ability to provide stable cutting in carbide and other refractory metals. It is most widely used to machine tungsten carbide when fine surface finishes are required. Thin sheets, small diameter rods, and tubing are all 60/40 (60% Tungsten, 40% copper) composition. Plates, round bars and square bars are 70/30 (70% tungsten, 30% copper) composition.

tungsten alloy plate picture

Tungsten Copper Alloy Wire
1. Aquadag layer on the surface of wire should be removed before using the wire is not suitable for contacting with iron, nickel, carbon, when the temperature is higher than 1000 . The wires should be preserved in dry room, i n which the relative humidity should not surpass 65%, and keeping away from acid or alkali atmosphere.
2. Cleaned wires should be preserved in dry vessels.

tungsten copper bar picture

Any feendback or inquiry of Tungsten Copper Alloy Products please feel free to contact us:
Email: sales@chinatungsten.com
Tel.: +86 592 512 9696 ; +86 592 512 9595
Fax.: +86 592 512 9797

More Info:  Tungsten Copper   Tungsten Copper Alloy