Tungsten Copper Tube

Tungsten Copper has the ability to provide stable cutting in carbide and other refractory metals. Tungsten copper tube is most widely used to machine tungsten carbide when fine surface finishes are required. Thin sheets, small diameter rods, and tubing are all 60/40 (60% Tungsten, 40% copper) composition. Plates, round bars and square bars are 70/30 (70% tungsten, 30% copper) composition.

Copper Tungsten Tubes/Pipes

Classification

Outside Diameter

Wall Thickness

Length(mm)

Temper

Pure Copper

3-95 mm

0.3-15 mm

In straight:<6,000 Incoil:6,000-20,000

Soft, Half  Hard, Hard

Phosphorus Deoxidized Copper

3-95 mm

0.3-15 mm

In straight:<6,000 Incoil:6,000-20,000

Soft, Half  Hard, Hard

Brass

3-70 mm

0.2-15 mm

In straight:<6,000

Soft, Half  Hard, Hard

Bronze

16-45 mm

2.5-5 mm

In straight:<6,000

Soft, Half  Hard, Hard

Tungsten Copper Tube (WCu)
2) Class: Round tube and Square tube
3) Specifications:
OD:5.0mm to 300 mm; Length: max 300 mm; Wall thickness: min 0.3 mm
Wall Thickness: 0.3-20mm*10-120mm*10-120mm; Length: 300mm below
All can be produced as the requirements of customers.

tungsten copper tube picture tungsten copper tube picture tungsten copper tube picture

Any feedback or inquiry of Tungsten Copper Alloy Products please feel free to contact us:
Email: sales@chinatungsten.com
Tel.: +86 592 512 9696 ; +86 592 512 9595
Fax.: +86 592 512 9797